IEC 60529 IPX1-8 Waterproof Test Equipment for Ingress Protection

• Drip board area: 1000 X1000mm
• Outer size: 1100 X 1200 X 2500 mm (L*D*H)
• Diameter of turntable: Φ 800mm plain perforated base with more perforations without boundaries
• Diameter of perforation for turntable base: 0.8cm, equipped with British M8 screw
• Hole Pitch for turntable base: 5cm
• Aperture of drop : 0.4mm
• Pitch-row(mm): 20 mm X 20 mm
• Delivery rate: Manual(IPX1:1±0.5mm/min, IPX2: 3±0.5mm/min)
• Preferred variable water delivery from 0.5mm / min to 10mm / min)
• Water flow meter required to indicate rainfall
• Adjustable Height of drip board : 500~1800mm
• Product under test (max): 50kg, dia. 800mm
• Turntable speed: 1 RPM ( With Adjustable Speed)
• Turntable height:600mm (Adjustable)
• Turntable angle: 15°
• Test time: 0~9999min
• The drip hole has a protective plate to prevent accidental injury to the operator. For example, the installation of the sample may accidentally injure the operator's head,as shown in the picture below

• Oscillating tubes :R1600, R1400, R1200, R1000, R800, R600, R400 and R200 (mm)
• Oscillate angle: 120º (IPX3), 350º (IPX4) or user-defined ( Adjustable angle)
• Inner diameter of oscillating tube (mm) : 15
• Hole Pitch : 50 mm
• Diameter of blowhole: 0.4 mm
• Water flow rate per hole : 0.07 L/ min ( Adjustable)
• Turntable with adjustable speed: Φ800 mm
• Height of turntable: 1000-1950 mm (Preferred)
• Water pressure: Display
• Product under test (max): 50 kg
• Material of tube: SUS304 stainless steel (Preferred)
• Duration of test : 0~9999min
• The drip hole has a protective plate to prevent accidental injury to the operator.

• Nozzle Diameter : 102mm
• Sphere Diameter: 75.5mm
• Hole No. : 121pcs
• Hole Diameter : 0.5mm
• Nozzle Material : Brass
• Water Discharge : 10L/min±5%, adjustable
• Pressure Gauge Range: 0~0.4Mpa
• 121 holes of 0.5mm; 1 hole at the center, 1 inner circles of 12 holes at 30°pitch, 4 outer circles of 24 holes at 15°pitch
• Flapper Detachable

• Control system: PLC controlled
• IPX5 nozzle diameter: 6.3 mm
• IPX6 nozzle diameter: 12.5 mm
• IPX5 water flow: 12.5±0.62 L/min
• IPX6 water flow: 100±5 L/min
• Water pressure: adjustment
• Water flow control adjustable , measured with digital flow meter
• Jet nozzle fixed type: hand-held
• The center part of the main flow from the nozzle: 2.5m diameter of about 120 mm round;
• Provide pipe and hose clamps.

• Volume: 100L
• Big flow pump: 0-7cbm/h
• Small flow pump: 0-3cbm/h
• Flow control: digital flow meter
• IPX6 flow control: manual
• Water supply: 4 ways, stainless steel pipe
• Filter: ceramic filter
• Power supply: 220VAC 50Hz
• Pressure control: electronic gauge(IPX4 spray nozzle)
• Control system: PLC controlled
• IPX7 sample lifting method: electric lift; sample maximum weight: 150KG

• Pressurized container: stainless steel tank, diameter 600mm, height 1000mm;
• pressure adjustment range: 0.01 ~ 1.0Mpa (simulated depth of 1-100 meters);
• pressurized system: stainless steel pump + inverter pressure;
• pressure gauge accuracy 0.25, measuring range 1.6Mpa;
• test time: 0-9999S;
• the maximum limit pressure: 1. 2 Mpa;
• pressure protection: safety valve;
• power: AC380V, 50HZ, 3KW;
• Remarks: There are various specifications for the pressure vessel size and pressure range, which can be customized.

• IPX1: Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes.
• IPX2: Protected against falling water when tilted up to 15 degrees – Same as IPX1 but unit is tested in 4 fixed positions – tilted 15 degrees in each direction from normal operating position.
• IPX3: Protected against spraying water – Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.
• IPX4: Protected against splashing water – Same as IPX3 but water is sprayed at all angles.
• IPX5: Protected against water jets – Water projected at all angles through a 6.3mm nozzle flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.
• IPX6: Protected against heavy seas – Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a 100kN/m2 pressure for 3 minutes from a distance of 3 meters.
• IPX7: Protected against water immersion – Immersion for 30 minutes at a depth of 1 meter.
• IPX8: Protected against water submersion – Equipment suitable for continual submersion in water under conditions as specified by manufacturer.
• IP1X: Protected against solid foreign objects of 50 mm diameter and greater.
• IP2X: Protected against solid foreign objects of 12.5 mm diameter and greater.
• IP3X: Protected against solid foreign objects of 2.5 mm diameter and greater.
• IP4X: Protected against solid foreign objects of 1.0 mm diameter and greater.
• IP5X: Dust-protected – Ingress of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety.
• IP6X: Dust-tight – No ingress of dust.

1 What IEC 60529?

IEC 60529 has been developed to rate and grade the resistance of enclosures of electric and electronic devices against the intrusion of dust and liquids. ... The first numeral refers to the protection against solid objects and is rated on a scale from 0 (no protection) to 6 (no ingress of dust).

2 How do I test ingress protection?

It is tested by exposing an item to an oscillating spray for a minimum of 10 minutes. An item passes when there is limited ingress with no harmful effects. The item is protected against ingress from low-pressure water jets directed from any angle if there is limited ingress with no harmful effects.

3 How do I get IP certified?

To get an IP rating for your product, you must arrange to test it. This should be done by an independent, certified company. The independent company will then give the product a numerical IP rating, based on the tests they have put it through

4 What is IP 65 testing?

IP65 Enclosures. Able to protect against water jets. Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects. Test duration: at least 15 minutes. Water volume: 12.5 litres per minute.

5 Can IPX6 be submerged?

IPX5: Can resist a sustained, low-pressure water jet spray. IPX6: Can resist high-pressure, heavy sprays of water. IPX6K: Can resist water jets of extremely high pressure. ... IPX7: Can be submerged up to 1 meter in water for 30 minutes

6 Which is better IP65 or IP68?

Most IP65 enclosures also come at a relatively lower price point, so they're a good choice for general applications that need a more basic enclosure. IP68 enclosures should be the choice when you need the most powerful protection for your outdoor devices.

7 Is standard for IP test?

Ingress Protection testing, or IP testing, determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. ... The Ingress Protection standard we most commonly test to is BS EN/IEC 60529.

8 How do I test IP67

Manufacturers use various types of electronics testing instruments for waterproof testing and to ensure compliance with IP67 standards. These instruments use different testing methods such as pressure decay, vacuum leak, tracer gas leak, and others to test seal integrity in a controlled setting.

9 Which is better IP54 or IP55?

The protection IP55 is complete protection against harmful deposits of dust contact with live or moving parts inside the enclosure. ... The protection IP54 is complete protection against harmful deposits of dust contact with live or moving parts inside the enclosure.

10 What IP is waterproof?

The ratings widely accepted as 'waterproof' for most general purposes are IP65, IP66 and IP67. However, one common misconception regarding weatherproofing is that items intended for prolonged outdoor use require the highest numerical IP ratings for moisture resistance.

11 What is NEMA 4X equivalent IP?

NEMA Ratings and IP Equivalency Chart

NEMA Rating	IP Equivalent	Protection Against Solids
4	IP66	6 = Totally protected against dust
4X	IP66	6 = Totally protected against dust
5	IP52	5 = Protected against dust - Limited ingress (no harmful deposit)
6	IP67	6 = Totally protected against dust

TAG:ingress protection test equipment,IP test equipment,iec60529 test equipment,iso20653 test equipment